Accessory

SELAMAT DATANG

MULTI PERSADA, Distributor peralatan laboratorium lingkungan dan perlatan pengujian kendaraan bermotor, berbagai produk dan model kami tampilkan didalam website sini.

Adapun produk Laboratorium Lingkungan meliputi :

Laboratorium Air : Water Test Kits, pH meters, Ion meters, ORP meters (Redox), Conductivity meters, Dissolved oxygen meters (DO), Hygrometers, Salinity, Turbidity, Thermometers, total Suspended Solids, Total Dissolved Solid, Spectro, Photometer, BOD COD, Thermoreactor. dll

Laboratorium Udara : Alat Uji Emisi Kendaraan , Alat Uji Emisi Cerobong Pabrik , Genset Boiler , Ketel Uap dan Turbin , HVAC , Alat Ukur Debu , Portable Gas detector , Indoor Air Quality , High Volume Air Sampler , Anemometer, Anemomaster , Climomaster , Airflow Meter , Air Velocity , Hotwire Anemomaster. dll

Laboratorium Suara/Kebisingan : Noise Meter, Dosimeter , Sound Level Meter , Sound Analyzer .

Laboratorium Getaran: Vibro meter , , Triaxlial Vibration, Monoxial Vibration.

Laboratorium Tanah: Soil Test Kits, pH, Lime requirement, Nitrate Nitrogen, Phosphate Phosphorus, Potassium, Calcium, Magnesium, Aluminium, Ammonia Nitrogen, Chloride, Copper, Iron, Manganese, Sulphate, Conductivity, Alat Pemantuan Sumur Resapan

Click "Hubungi Kami " untuk pemesanan maupun permintaan penawaran.

Accessory

Da pulse detector

With a built-in pulse detector, output can be sent to external equipment (e.g. counter or computer).
Various pulse rates are available, please state your desired rate when ordering.

Intrinsic safety barrier

Similar to the Da pulse detector, but with a safety barrier. This enables data collection when measuring explosive gases.

Pressure sensor

Pressure sensor can be connected to a gas meter, for collection of gas pressure data.
Various ranges are available, also for high pressure.

Temperature sensor

This product uses a resistance thermometer (Pt 1000Ω) and a converter to provide temperature data.

U type glass tube for 1kPa manometer

Replacement tube for 1kPa manometer (standard for W-NK type wet gas meter). Replacement must be done according to the manual.

Stick type thermometer with protector

Standard attachment for W-NK type wet gas meter. It can also be attached to DC and DS type dry gas meters. The new type of thermometer can not be inserted into the old type of protector. Thus, if you need to replace an old thermometer, please also change the protector.

3.6kPa manometer

Standard attachment for Reference Standard, calibration and W-NT type wet gas meter.

1.8kPa U type glass manometer

Optional accessory for WS-1A type wet gas meter and DC/DS type dry gas meters.

3.6kPa U type glass manometer

Optional accessory for WS-1A type wet gas meter and DC/DS type dry gas meters.

Inlet and outlet connector

Standard attachment for DC type dry gas meter and WS-1A wet gas meter.
The diameter of the connector can be changed on request. However, measurement range and calibration result could change as a result of this. Please contact a sales representative if you wish to make this change.

Carry case

Made of aluminum, giving it good durability. The inside of the case has polyurethane as buffer material. The DC version has a shoulder strap for easy carrying.

Corrosion inhibitor for wet gas meter

The sealing liquid used in wet gas meters is usually water. However, long-term use can lead to corrosion, resulting in inaccuracy in measurements. This corrosion inhibitor allows the meter to be used longer before corrosion occurs. Please contact our sales department for details on use, and safety specification sheet.